Released Notes
Product:
Version:
v2.0.1324.20110126
Release History:
v2.0.939.20100726
1. Use the bg mode when AP is in WEP and TKIP mode. (Recommended by latest WiFi 11n test plan).
2. First release.
v2.0.967.20100730
1. Add functionality of Antenna diversity.
v2.0.974.20100803
1. Fixed the Big Endian issue.
v2.0.1042.20100902
1. Resolved static link issue with RTL8712U.
2. Fixed the Ad-hoc connection bug when the Ad-hoc ssid is the same with someone AP's SSID.
3. Update related PHY parameters to improve throughput.
4. Improve Antenna diversity algorithm.
v2.0.1126.20101020
1. Added USB’s selective suspend feature.
2. Added the Realtek GPL into each C and header files.
3. Added related ioctrl command for Android platform.
4. Fixed NIC status display issue.
5. Fixed power training issue at station mode.
v2.0.1170.20101112
1. Modify the CONFIG section of Android-x86
2. Fixed radius issue.
3. Update FW to V60.
4. Support the Power saving function.
5. Update usb_id_table to v38.
6. Fixed the kernel panic when receive WDS packet.
v2.0.1180.20101116
1. Fixed compiler error.
v2.0.1212.20101205
1. Fix the Android private wifi ioctl SCAN-ACTIVE, SCAN-PASSIVE
2. Alter the retry limit of "Active disconnect" to 8
3. Fix the overkilling problem of active disconnect caused by frequently site surveying
4. Fix the connect/disconnect looping problem on Android.
5. Removed the "scan interval" protection of site survey function temporarily
6. Adjust locking mechanism of TX, and fix race-condition issue.
v2.0.1212.20101208
1. Add Kconfig.
1. Synchronization strategy improved.
2. Fixed the AP Tx fragment issue when using the WPA2-RADIUS.
3. Added the IP header 8 bytes alignment.
4. Added new feature - Easy Replacement.
5. Added 20/40 MHz Coexistence test item (5.2.48 for wifi test )
6. Fixed related connection failure issue in Ad-hoc mode.
7. Updated usb_id_table to DID_USB_v47_20110118.
Description:
Realtek provides the solution for WLAN in hardware and software. The software package could be adopted in Realtek demo-board in the Linux platform.
Software Version:
RTL8192C USB Linux Driver Version: v2.0.1324.20110126
Firmware Version:
Firmware is embedded in the RTL8192C USB driver.
The firmware version of this release is V60
Software Package Included:
a. Readme.txt
b. Release Notes
c. Linux driver
d. wpa_supplicant - wpa_supplicant-0.6.9_wps_patch_20100201.zip
e. document - quick_installation_guide.ppt
f. document - wireless tool porting guide.doc
g. document - wpa_cli usage guide (wpa_cli_with_wpa_supplicant_20100728.doc)
h. document - sample code for hardware wps PBC
i. document - HowTo support more VidPids.doc
j. document – HowTo support new platform.doc
k. document - HowTo build driver under kernel tree.doc
l. wpa.conf – the config file for wpa_supplicant launch
Hardware Supported:
Realtek RTL8192C USB demo board:
n WIFI – SoC, including a CPU, one 802.11b/g/n MAC/Baseband/RF controller with PA for the USB interface.
Platform Supported:
n LINUX (kernel 2.6.18 ~ 2.6.35)
CPU supported:
n x86
n ARM
n MIPS
Software Package Feature:
n IEEE 802.11 b/g/n WiFi compliant
n 802.1x, WEP, WPA TKIP and WPA2 AES/Mixed mode for PSK and TLS (Radius)
n Wireless Auto-channel selection
n WPS - PIN and PBC Methods
n IEEE 802.11b/g/n client mode
- Support Ad-hoc and infrastructure mode with roaming capability
- Support wireless security for WEP, WPA TKIP and WPA2 AES PSK
- Support site survey scan and manual connect
- Support WPA/WPA2 TLS client
- Support power saving mode
To-Do List:
n To add soft AP mode
n To add WiFi-Direct
- 2 -
mb7375