dsp_presets.txt

(47 KB) Pobierz
// DSP preset definition file.

/////////////////////////////////////
// WARNING: do not edit this file! //
/////////////////////////////////////

// console "dsp_reload" reloads while engine running

// PROCESSOR TYPE:
//  NULL			0		// pass through - must be 0
//  DLY				1		// simple feedback reverb
//  RVA				2		// parallel reverbs
//  FLT				3		// lowpass or highpass filter
//  CRS				4		// chorus					NOT TESTED
//  PTC				5		// pitch shifter			NOT TESTED (UPDATE: DOES NOT INTEGRATE WITH NEW SOUND LENGTH CODE. DO NOT USE.)
//  ENV				6		// adsr envelope			NOT TESTED
//  LFO				7		// lfo
//  EFO				8		// envelope follower/gate		
//  MDY				9		// mod delay
//  DFR				10		// diffusor - n series allpass delays
//  AMP				11		// amplifier with distortion

// FILTER TYPE: 
//  LP	0					// lowpass filter
//  HP	1					// highpass filter
//  BP  2					// bandpass filter

// FILTER QUALITY:
//  LO				0		// quality of filter or reverb.  Must be 0,1,2,3.
//  MED				1
//  HI				2
//  VHI				3

// DELAY TYPE:
//  PLAIN			0		// single feedback loop
//  ALLPASS			1		// feedback and feedforward loop - flat frequency response (diffusor)
//  LOWPASS			2		// lowpass filter in feedback loop
//  DLINEAR			3		// linear delay, no feedback, unity gain
//  FLINEAR			4		// linear delay with lowpass filter and output gain
//  LOWPASS_4TAP	5		// lowpass filter in feedback loop, 4 delay taps
//  PLAIN_4TAP		6		// single feedback loop, 4 delay taps

// LFO TYPE: 
//  SIN				0	// sine wav
//  TRI				1	// triangle wav
//  SQR				2	// square wave, 50% duty cycle
//  SAW				3	// forward saw wav
//  RND				4	// random wav
//  LOG_IN			5	// logarithmic fade in	NOT TESTED
//  LOG_OUT			6	// logarithmic fade out	NOT TESTED
//  LIN_IN			7	// linear fade in 	
//  LIN_OUT			8	// linear fade out	

// ENVELOPE TYPE:
//  LIN				0	// linear a,d,s,r
//  EXP				1	// exponential a,d,s,r (IGNORED)

// PRESET CONFIGURATION TYPE:
//  SIMPLE			0	// optimized
//  LINEAR			1	// optimized
//  PARALLEL2		5
//  PARALLEL4		6
//  PARALLEL5		7
//  FEEDBACK		8
//  FEEDBACK3		9
//  FEEDBACK4		10
//  MOD				11	// NOT TESTED
//  MOD2			12	// NOT TESTED
//  MOD3			13  // NOT TESTED

//  PSET_SIMPLE		0
// x(n)--->P(0)--->y(n)

//  PSET_LINEAR		1
// x(n)--->P(0)-->P(1)-->...P(m)--->y(n)

//  PSET_PARALLEL2	5	
// x(n)--->P(0)-->(+)-->y(n)
//      		   ^
//	               | 
// x(n)--->P(1)-----

//  PSET_PARALLEL4	6
// x(n)--->P(0)-->P(1)-->(+)-->y(n)
//        		          ^
//		                  | 
// x(n)--->P(2)-->P(3)-----

//  PSET_PARALLEL5	7
// x(n)--->P(0)-->P(1)-->(+)-->P(4)-->y(n)
//      		          ^
//		                  | 
// x(n)--->P(2)-->P(3)-----

//  PSET_FEEDBACK	8
// x(n)-P(0)--(+)-->P(1)-->P(2)-->->y(n)
//             ^		        |
//             |                v 
//	           -----P(4)<--P(3)--

//  PSET_FEEDBACK3	9
// x(n)---(+)-->P(0)--------->y(n)
//         ^               |
//         |               v 
//	       -----P(2)<--P(1)--

//  PSET_FEEDBACK4	10
// x(n)---(+)-->P(0)-------->P(3)--->y(n)
//         ^              |
//         |              v 
//	       ---P(2)<--P(1)--

//  PSET_MOD		11
// x(n)------>P(1)--P(2)--P(3)--->y(n)
//                    ^     
// x(n)------>P(0)....:

//  PSET_MOD2		12
// x(n)-------P(1)-->y(n)
//              ^     
// x(n)-->P(0)..:


//  PSET_MOD3		13
// x(n)-------P(1)-->P(2)-->y(n)
//              ^     
// x(n)-->P(0)..:


// PRESET DEFINITIONS: (correct use of parentheses is critical for parsing)
//
// { <preset#> <preset configuration type> <# processors> <gain> 
//	{<preset type> <param0>...<param15>}
//	{<preset type> <param0>...<param15>} ... }

// Presets are made up of one or more processors.  A preset corresponds to a 'room'. 

// #:		preset number - must be unique, no holes in # sequence (although sequential order in this file is not important)
// ptype:	preset type from PSET_* above - typically LINEAR - this is how the processors are chained
// mixrng:	min and max dsp mix values for sounds.  mix value is based on sound source distance from listener.
//			Smaller rooms have larger min values.  Sounds far from listener have more dsp fx mix.
// duration:	if 0.0, preset lasts until another is set
//				if > 0.0 duration is preset duration in seconds. resets to previous preset when time expires
// fadetime:    time to fade out preset if duration > 0.0. if fadetime < 0, exponential fade.
// db_min:		for dsp_room only: if sndlvl in dB of a new sound is < db_min, reduce mix_min/max by db_mixdrop					
// db_mixdrop:	for dsp_room only: reduce mix_min/max by n% if sndlvl of new sound less than db_min
//				so - for some rooms (ie: outside) low level sounds get less dsp fx mix

// *******************************************************************
// presets 0-29 map to legacy room_type 0-29. Don't change order or #
// *******************************************************************
//  #	ptype	mixrng  dur fade dbmin mixdrop
																// *** NULL PRESET *** 
{	0	LINEAR	0.2 0.7 0.0  0.0  80 0.5	
							{0	0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 }
}

																//  *** AUTO PRESET *** 
{	1	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							{0	0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 }
}	

																//  *** METALIC S *** 
{	2	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA  80.0 30.0  	4		0.85	1.1		4000	1		0 0    0  0  0  0   0   0   0} 
}

																//  *** METALIC M *** 
{	3	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA  80.0 30.0  	4		0.9		1.4		4000	1		0 0    0  0  0  0   0   0   0} 
}

																//  *** METALIC L *** 
{	4	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	3		0.1483	}

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA 100.0 30.0  	4		0.95	1.8		4000	1		0 0    0  0  0  0   0   0   0} 
														
}
																//  *** TUNNEL S *** 
{	5	LINEAR	0.2 0.7	0.0  0.0  80 0.5						
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA 50.0  8.0    2		0.92 	 1.1 	6000 	1 		0 0    0  0  0  0   0   0   0} 

}
																//  *** TUNNEL M *** 
{	6	LINEAR	0.2 0.7	0.0  0.0  80 0.5	
							// DFR size #dly	feedbk
							{  DFR	1.0	2		0.15	}	

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA 100.0 15.0   2		0.92 	 1.1 	5000 	1 		0 0    0  0  0  0   0   0   0} 
}

																//  *** TUNNEL L *** 
{	7	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	3		0.15	}	

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA 120.0 25.0   2		0.95 	 1.1 	4000 	1 		0 0    0  0  0  0   0   0   0} 
}

																//  *** CHAMBER S *** 
{	8	LINEAR	0.2 0.7 0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	2		0.15	}

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA	50.0 20.0   6		0.9 	1.4 	5000 	1 		4 3.48 0  0  0  0   0   0   0} 
}

																//  *** CHAMBER M *** 
{	9	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	2		0.15	}

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA	50.0 20.0   6		0.9 	1.4 	6000 	1 		4 3.48 0  0  0  0   0   0   0} 
}

																//  *** CHAMBER L *** 
{	10	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	2		0.15	}

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA	50.0 20.0   9		0.9 	1.4 	6000 	1 		4 3.48 0  0  0  0   0   0   0} 
}

																//  *** BRITE S *** 
{	11	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap 
							{  RVA	50.0 20.0   3		0.9 	1.0 	5000 	1 		0 0  0  0  0   0   0   0} 
}

																//  *** BRITE M *** 
{	12	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap 
							{  RVA	50.0 20.0   5		0.9 	1.0		5000 	1 		0 0  0  0  0   0   0   0} 
}

																//  *** BRITE L *** 
{	13	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap 
							{  RVA	50.0 20.0   6		0.9 	1.0		6000 	0		0 0  0  0  0   0   0   0} 
}

																//  *** WATER S *** 
{	14	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	3		0.15	}

							// AMP	gain	vthresh	distmix	vfeed	modrate	moddepth modglide rand
							{  AMP	1.0		0		0		0.0		10.0	0.6		80			0} 

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA 82.0  59.0   2		0.4 	2.0		1800 	0 	   10 3.0 0  0  0  0   0   0   0} 
							
}
																//  *** WATER M *** 
{	15	LINEAR	0.2 0.7	0.0  0.0  80 0.5		
							// DFR size #dly	feedbk
							{  DFR	1.0	2		0.15	}

							// RVA size	 min   	#dly	feedbk	gain	cutoff	fpar fmod rate w  d  h  fw  fw  fh ftap
							{  RVA	50.0 20.0   5		0.9 	1.4		1000 	0 		4 3.48 0  0  0  0   0   0   0} 
}

																//  *** WATER L *** 
{	16	LINEAR	...
Zgłoś jeśli naruszono regulamin