WIMA MKS 2 oznaczenia.pdf

(373 KB) Pobierz
D
WIMA MKS 2
Metallized Polyester (PET)
Capacitors in PCM 5 mm
Special Features
Electrical Data
˜ High volume/capacitance ratio
˜ Self-healing
˜ According to RoHS 2002/95/EC
Capacitance range:
0.01 mF to 10 mF (E12-values on request)
Rated voltages:
50 VDC, 63 VDC, 100 VDC, 250 VDC,
400 VDC, 630 VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
–55+ C to +100+ C (+125° C available
subject to special enguiry)
Climatic test category:
55/100/21 in accordance with IEC
Insulation resistance at +20+ C:
U r U test C  0.33 mF 0.33 mF < C  10 mF
50 VDC 10 V 5 x 10 3 M¸ (mean value: 3 x 10 4 M¸) 1000 sec (M¸ x mF) (mean value: 3000 sec)
63 VDC 50 V 1 x 10 4 M¸ (mean value: 5 x 10 4 M¸) 1250 sec (M¸ x mF) (mean value: 3000 sec)
100 VDC 100 V 1.5 x 10 4 M¸ (mean value: 1 x 10 5 M¸) 3000 sec (M¸ x mF) (mean value: 6000 sec)
Measuring time: 1 min.
Dissipation factors at + 20) C: tan d
Test specifications:
In accordance with IEC 60384-2
and EN 130 400
Test voltage: 1.6 U r , 2 sec.
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages
Reliability:
Operational life  300 000 hours
Failure rate  2 fit (0.5 x U r and 40) C)
Typical Applications
For general DC-applications e.g.
˜ By-pass
˜ Blocking
˜ Coupling and decoupling
˜ Timing
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
at f
C  0.1 mF
0.1 mF < C  1.0 mF
C > 1.0 mF
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
 8 x 10 -3
 8 x 10 -3
 10 x 10 -3
1 kHz
10 kHz
 15 x 10 -3
 15 x 10 -3
–
100 kHz
 30 x 10 -3
–
–
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
Pulse rise time V/msec
mF
max. operation/test
50 VDC
63 VDC
100 VDC
250 VDC
400 VDC
630 VDC
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Silver/White.
Epoxy resin seal: Red
0.01 ... 0.022
–
35/350
35/350
50/500
80/800
110/1100
0.033 ... 0.068
–
20/200
25/250
50/500
80/800
90/900
0.1 ... 0.47
10/100
15/150
20/200
50/500
80/800
–
0.68 ... 1.0
8/80
12/120
15/150
25/250
–
–
1.5 ... 3.3
8/80
7.5/75
10/100
–
–
–
4.7
5/50
5/50
–
–
–
–
6.8
3/30
3/30
–
–
–
–
10
2.5/25
–
–
–
–
–
Mechanical Tests
Packing
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec 2 in
accordance with IEC 60068-2-29
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
33
1036146067.344.png 1036146067.355.png 1036146067.365.png 1036146067.376.png 1036146067.001.png 1036146067.012.png 1036146067.023.png 1036146067.034.png 1036146067.045.png 1036146067.056.png 1036146067.067.png 1036146067.078.png 1036146067.089.png 1036146067.100.png 1036146067.111.png 1036146067.122.png 1036146067.133.png 1036146067.144.png 1036146067.155.png 1036146067.166.png 1036146067.177.png 1036146067.188.png 1036146067.199.png 1036146067.209.png 1036146067.220.png
 
D
WIMA MKS 2
WIMA FKP 4
Continuation
General Data
Capacitance
50 VDC/30 VAC*
63 VDC/40 VAC*
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
0.01 mF
2.5
6.5
7.2
5
MKS2C021001A00_ _ _ _
0.015 „
2.5
6.5
7.2
5
MKS2C021501A00_ _ _ _
0.022 „
2.5
6.5
7.2
5
MKS2C022201A00_ _ _ _
0.033 „
2.5
6.5
7.2
5
MKS2C023301A00_ _ _ _
0.047 „
2.5
6.5
7.2
5
MKS2C024701A00_ _ _ _
0.068 „
2.5
6.5
7.2
5
MKS2C026801A00_ _ _ _
0.1 mF
2.5
6.5
7.2
5
MKS2C031001A00_ _ _ _
0.15 „
2.5
6.5
7.2
5
MKS2C031501A00_ _ _ _
0.22 „
3
7.5
7.2
5
MKS2C032201B00_ _ _ _
0.33 „
2.5
6.5
7.2
5
MKS2B033301A00_ _ _ _
3.5
8.5
7.2
5
MKS2C033301C00_ _ _ _
0.47 „
3
7.5
7.2
5
MKS2B034701B00_ _ _ _
3.5
8.5
7.2
5
MKS2C034701C00_ _ _ _
0.68 „
3.5
8.5
7.2
5
MKS2B036801C00_ _ _ _
4.5
9.5
7.2
5
MKS2C036801E00_ _ _ _
1.0 mF
3.5
8.5
7.2
5
MKS2B041001C00_ _ _ _
5
10
7.2
5
MKS2C041001F00_ _ _ _
1.5 „
4.5
9.5
7.2
5
MKS2B041501E00_ _ _ _
5.5
11.5
7.2
5
MKS2C041501H00_ _ _ _
2.2 „
5
10
7.2
5
MKS2B042201F00_ _ _ _
7.2
13
7.2
5
MKS2C042201K00_ _ _ _
3.3 „
5.5
11.5
7.2
5
MKS2B043301H00_ _ _ _
7.2
13
7.2
5
MKS2C043301K00_ _ _ _
4.7 „
7.2
13
7.2
5
MKS2B044701K00_ _ _ _
8.5
14
7.2
5
MKS2C044701M00_ _ _ _
6.8 „
8.5
14
7.2
5
MKS2B046801M00_ _ _ _
11
16
7.2
5
MKS2C046801N00_ _ _ _
10 mF
11
16
7.2
5
MKS2B051001N00_ _ _ _
Capacitance
100 VDC/63 VAC*
250 VDC/160 VAC*
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
0.01 mF
2.5
6.5
7.2
5
MKS2D021001A00_ _ _ _
2.5
6.5
7.2
5
MKS2F021001A00_ _ _ _
0.015 „
2.5
6.5
7.2
5
MKS2D021501A00_ _ _ _
2.5
6.5
7.2
5
MKS2F021501A00_ _ _ _
0.022 „
2.5
6.5
7.2
5
MKS2D022201A00_ _ _ _
2.5
6.5
7.2
5
MKS2F022201A00_ _ _ _
0.033 „
2.5
6.5
7.2
5
MKS2D023301A00_ _ _ _
3.5
8.5
7.2
5
MKS2F023301C00_ _ _ _
0.047 „
2.5
6.5
7.2
5
MKS2D024701A00_ _ _ _
3.5
8.5
7.2
5
MKS2F024701C00_ _ _ _
0.068 „
2.5
6.5
7.2
5
MKS2D026801A00_ _ _ _
3.5
8.5
7.2
5
MKS2F026801C00_ _ _ _
0.1 mF
2.5
6.5
7.2
5
MKS2D031001A00_ _ _ _
4.5
9.5
7.2
5
MKS2F031001E00_ _ _ _
0.15 „
3.5
8.5
7.2
5
MKS2D031501C00_ _ _ _
5
10
7.2
5
MKS2F031501F00_ _ _ _
0.22 „
3.5
8.5
7.2
5
MKS2D032201C00_ _ _ _
5.5
11.5
7.2
5
MKS2F032201H00_ _ _ _
0.33 „
4.5
9.5
7.2
5
MKS2D033301E00_ _ _ _
7.2
13
7.2
5
MKS2F033301K00_ _ _ _
0.47 „
4.5
9.5
7.2
5
MKS2D034701E00_ _ _ _
8.5
14
7.2
5
MKS2F034701M00_ _ _ _
0.68 „
5
10
7.2
5
MKS2D036801F00_ _ _ _
11
16
7.2
5
MKS2F036801N00_ _ _ _
1.0 mF
7.2
13
7.2
5
MKS2D041001K00_ _ _ _
1.5 „
8.5
14
7.2
5
MKS2D041501M00_ _ _ _
2.2 „
11
16
7.2
5
MKS2D042201N00_ _ _ _
* AC voltage: f = 50 Hz; 1.4 x U rms + UDC  U r
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
** PCM = Printed circuit module = pin spacing.
W
L
Dims. in mm.
H
The value 10 mF has been transferred
from the former WIMA MKS 2-XL range.
6 -2
d
5
PCM
at the pin exit points
( 0.5)
d = 0.5 P
±
Rights reserved to amend design data without prior notification.
Continuation page 35
34
1036146067.240.png 1036146067.251.png 1036146067.262.png 1036146067.273.png 1036146067.284.png 1036146067.295.png 1036146067.306.png 1036146067.317.png 1036146067.324.png 1036146067.325.png 1036146067.326.png 1036146067.327.png 1036146067.328.png 1036146067.329.png 1036146067.330.png 1036146067.331.png 1036146067.332.png 1036146067.333.png 1036146067.334.png 1036146067.335.png 1036146067.336.png 1036146067.337.png 1036146067.338.png 1036146067.339.png 1036146067.340.png 1036146067.341.png 1036146067.342.png 1036146067.343.png 1036146067.345.png 1036146067.346.png 1036146067.347.png 1036146067.348.png 1036146067.349.png 1036146067.350.png 1036146067.351.png 1036146067.352.png 1036146067.353.png 1036146067.354.png 1036146067.356.png 1036146067.357.png 1036146067.358.png 1036146067.359.png 1036146067.360.png 1036146067.361.png
 
D
WIMA MKS 2
WIMA FKP 4
Continuation
General Data
Capacitance
400 VDC/200 VAC*
630 VDC/220 VAC*
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
0.01 mF
2.5
6.5
7.2
5
MKS2G021001A00_ _ _ _
5.5
11.5
7.2
5
MKS2J021001H00_ _ _ _
0.015 „
2.5
6.5
7.2
5
MKS2G021501A00_ _ _ _
7.2
13
7.2
5
MKS2J021501K00_ _ _ _
0.022 „
3.5
8.5
7.2
5
MKS2G022201C00_ _ _ _
7.2
13
7.2
5
MKS2J022201K00_ _ _ _
0.033 „
4.5
9.5
7.2
5
MKS2G023301E00_ _ _ _
7.2
13
7.2
5
MKS2J023301K00_ _ _ _
0.047 „
4.5
9.5
7.2
5
MKS2G024701E00_ _ _ _
8.5
14
7.2
5
MKS2J024701M00_ _ _ _
0.068 „
5.5
11.5
7.2
5
MKS2G026801H00_ _ _ _
0.1 mF
7.2
13
7.2
5
MKS2G031001K00_ _ _ _
0.15 „
8.5
14
7.2
5
MKS2G031501M00_ _ _ _
0.22 „
11
16
7.2
5
MKS2G032201N00_ _ _ _
* AC voltage: f = 50 Hz; 1.4 x U rms + UDC  U r
** PCM = Printed circuit module = pin spacing.
Dims. in mm.
The values of the WIMA MKM 2 and
WIMA MKI 2 ranges according to the
main catalogue 2009 are still available
on request.
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
Impedance change with frequency
(general guide).
Rights reserved to amend design data without prior notification.
Permissible AC voltage in relation to
frequency at 10) C internal tempera-
ture rise (general guide).
35
1036146067.362.png 1036146067.363.png 1036146067.364.png 1036146067.366.png 1036146067.367.png 1036146067.368.png 1036146067.369.png 1036146067.370.png 1036146067.371.png 1036146067.372.png 1036146067.373.png 1036146067.374.png 1036146067.375.png 1036146067.377.png 1036146067.378.png 1036146067.379.png 1036146067.380.png 1036146067.381.png 1036146067.382.png 1036146067.383.png 1036146067.384.png 1036146067.385.png 1036146067.386.png 1036146067.002.png 1036146067.003.png 1036146067.004.png 1036146067.005.png 1036146067.006.png 1036146067.007.png 1036146067.008.png 1036146067.009.png 1036146067.010.png 1036146067.011.png 1036146067.013.png 1036146067.014.png 1036146067.015.png 1036146067.016.png 1036146067.017.png 1036146067.018.png 1036146067.019.png 1036146067.020.png 1036146067.021.png 1036146067.022.png 1036146067.024.png 1036146067.025.png 1036146067.026.png 1036146067.027.png 1036146067.028.png 1036146067.029.png 1036146067.030.png 1036146067.031.png 1036146067.032.png 1036146067.033.png 1036146067.035.png 1036146067.036.png 1036146067.037.png 1036146067.038.png 1036146067.039.png 1036146067.040.png 1036146067.041.png 1036146067.042.png 1036146067.043.png 1036146067.044.png 1036146067.046.png 1036146067.047.png 1036146067.048.png 1036146067.049.png 1036146067.050.png 1036146067.051.png 1036146067.052.png 1036146067.053.png 1036146067.054.png 1036146067.055.png 1036146067.057.png 1036146067.058.png 1036146067.059.png 1036146067.060.png 1036146067.061.png 1036146067.062.png 1036146067.063.png 1036146067.064.png 1036146067.065.png 1036146067.066.png 1036146067.068.png 1036146067.069.png 1036146067.070.png 1036146067.071.png 1036146067.072.png 1036146067.073.png 1036146067.074.png 1036146067.075.png 1036146067.076.png 1036146067.077.png 1036146067.079.png 1036146067.080.png 1036146067.081.png 1036146067.082.png 1036146067.083.png 1036146067.084.png 1036146067.085.png 1036146067.086.png 1036146067.087.png 1036146067.088.png 1036146067.090.png 1036146067.091.png 1036146067.092.png 1036146067.093.png 1036146067.094.png 1036146067.095.png 1036146067.096.png 1036146067.097.png 1036146067.098.png 1036146067.099.png 1036146067.101.png 1036146067.102.png 1036146067.103.png 1036146067.104.png 1036146067.105.png 1036146067.106.png 1036146067.107.png 1036146067.108.png 1036146067.109.png 1036146067.110.png 1036146067.112.png 1036146067.113.png 1036146067.114.png 1036146067.115.png 1036146067.116.png 1036146067.117.png 1036146067.118.png 1036146067.119.png 1036146067.120.png 1036146067.121.png 1036146067.123.png 1036146067.124.png 1036146067.125.png 1036146067.126.png 1036146067.127.png 1036146067.128.png 1036146067.129.png 1036146067.130.png 1036146067.131.png 1036146067.132.png 1036146067.134.png 1036146067.135.png 1036146067.136.png 1036146067.137.png 1036146067.138.png 1036146067.139.png 1036146067.140.png 1036146067.141.png 1036146067.142.png 1036146067.143.png 1036146067.145.png 1036146067.146.png 1036146067.147.png 1036146067.148.png 1036146067.149.png 1036146067.150.png 1036146067.151.png 1036146067.152.png 1036146067.153.png 1036146067.154.png 1036146067.156.png 1036146067.157.png 1036146067.158.png 1036146067.159.png 1036146067.160.png 1036146067.161.png 1036146067.162.png 1036146067.163.png 1036146067.164.png 1036146067.165.png 1036146067.167.png 1036146067.168.png 1036146067.169.png 1036146067.170.png 1036146067.171.png 1036146067.172.png 1036146067.173.png 1036146067.174.png 1036146067.175.png 1036146067.176.png 1036146067.178.png 1036146067.179.png 1036146067.180.png 1036146067.181.png 1036146067.182.png 1036146067.183.png 1036146067.184.png 1036146067.185.png 1036146067.186.png 1036146067.187.png 1036146067.189.png 1036146067.190.png 1036146067.191.png 1036146067.192.png 1036146067.193.png 1036146067.194.png 1036146067.195.png 1036146067.196.png 1036146067.197.png 1036146067.198.png 1036146067.200.png 1036146067.201.png 1036146067.202.png 1036146067.203.png 1036146067.204.png 1036146067.205.png 1036146067.206.png 1036146067.207.png 1036146067.208.png
 
D
Recommendation for Processing
and Application of
Through-Hole Capacitors
Soldering Process
Wave soldering
[°C]
10 s
A preheating of through-hole WIMA
capacitors is allowed for temperatures
T max  100 ° C.
In practice a preheating duration of
t  5 min. has been proven to be best.
T
see detail-
enlargement
260
240
220
200
180
160
140
120
100
80
60
40
20
2 s
3 s
Single wave soldering
Soldering bath temperature: T  260 ° C
Immersion time:
t  5 sec
Double wave soldering
Soldering bath temperature: T  260 ° C
Immersion time:
t
2 x t  3 sec
30
60
90
120
150
180
210
240
[
sec]
Due to different soldering processes and
heat requirements the graphs are to be
regarded as a recommendation only.
Typical temperature/time graph for double wave soldering
WIMA Quality and Environmental Philosophy
ISO 9001:2008 Certification
WIMA Environmental Policy
RoHS Compliance
ISO 9001:2008 is an international basic
standard of quality assurance systems for
all branches of industry. The approval
according to ISO 9001:2008 of our
factories by the VDE inspectorate certifies
that organisation, equipment and moni-
toring of quality assurance in our factories
correspond to internationally recognized
standards.
All WIMA capacitors, irrespective of
whether through-hole devices or SMD,
are made of environmentally friendly
materials. Neither during manufacture
nor in the product itself any toxic
substances are used, e.g.
– Lead – PBB/PBDE
– PCB – Arsenic
– CFC – Cadmium
– Hydrocarbon chloride – Mercury
– Chromium 6+ – etc.
We merely use pure, recyclable materials
for packing our components, such as:
According to the RoHS Directive 2002/95/EC
certain hazardous substances like e.g. lead,
cadmium, mercury must not be used any
longer in electronic equipment as of July 1st,
2006. For the sake of the environment WIMA
has refraind from using such substances since
years already.
WIMA WPCS
The WIMA Process Control System (WPCS)
is a quality surveillance and optimization
system developed by WIMA. WPCS is a
major part of the quality-oriented WIMA
production. Points of application of WPCS
during production process:
” carton
” cardboard
” adhesive tape made of paper
” polystyrene
Tape for lead-free WIMA capacitors
” incoming material inspection
” metallization
” film inspection
” schoopage
” pre-healing
” pin attachment
” cast resin preparation/
encapsulation
” 100% final inspection
” AQL check
We almost completely refrain from using
packing materials such as:
DIN EN ISO 14001:2009
WIMA’s environmental management has
been established in accordance with the
guidelines of DIN EN ISO 14001:2009 to
optimize the production processes with
regard to energy and resources.
” foamed polystyrene (Styropor®)
” adhesive tapes made of plastic
” metal clips
14
1036146067.210.png 1036146067.211.png 1036146067.212.png 1036146067.213.png 1036146067.214.png 1036146067.215.png 1036146067.216.png 1036146067.217.png 1036146067.218.png 1036146067.219.png 1036146067.221.png 1036146067.222.png 1036146067.223.png 1036146067.224.png 1036146067.225.png 1036146067.226.png 1036146067.227.png 1036146067.228.png 1036146067.229.png 1036146067.230.png 1036146067.231.png 1036146067.232.png 1036146067.233.png 1036146067.234.png 1036146067.235.png
 
D
Typical Dimensions for
Taping Configuration
V h
P 2
P
P 1
Diagram 1:
PCM 2.5/5/7.5mm
D 0
d
F
P 0
P
P
P 1
P 1
d
d
P 0
P 2
P 0
F
P 2
F
Diagram 2: PCM 10/15 mm
Diagram 3: PCM 22.5 and 27.5*mm
*PCM 27.5 taping possible wi th two feed holes between components
Dimensions for Radial Taping
Designation
Symbol PCM 2.5 taping
PCM 5 taping
PCM 7.5 taping
PCM 10 taping *
PCM 15 taping *
PCM 22.5 taping
PCM 27.5 taping
Carrier tape width
W
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
6.0 for hot-sealing
6.0 for hot-sealing
12.0 for hot-sealing
12.0 for hot-sealing
12.0 for hot-sealing
12.0 for hot-sealing
12.0 for hot-sealing
Hold-down tape width
W 0
adhesive tape
adhesive tape
adhesive tape
adhesive tape
adhesive tape
adhesive tape
adhesive tape
Hole position
W 1
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
Hold-down tape position
W 2
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
Feed hole diameter
D 0
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
* 8.1 p1.5 or 50.8 p1.5
Pitch of component
P
12.7 p1.0
12.7 p1.0
12.7 p1.0
25.4 p1.0
25.4 p1.0
38.1 p1.5
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
Feed hole pitch
P 0
12.7 p0.3 error max.
12.7 p0.3 error max.
12.7 p0.3 error max.
12.7 p0.3 error max.
12.7 p0.3 error max.
12.7 p0.3 error max.
12.7 p0.3 error max.
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
Feed hole centre
5.3 p0.7
P 1
5.1 p0.5
3.85 p0.7
2.6 p0.7
7.7 p0.7
5.2 p0.7
7.8 p0.7
to pin
Hole centre to
19.05 p1.3
P 2
6.35 p1.3
6.35 p1.3
6.35 p1.3
12.7 p1.3
12.7 p1.3
19.05 p1.3
component centre
Feed hole centre to bottom
16.5 p0.3
16.5 p0.3
16.5 p0.5
16.5 p0.5
16.5 p0.5
16.5 p0.5
16.5 p0.5
H
edge of the component
18.5 p0.5
18.5 p0.5
18.5 p0.5
18.5 p0.5
18.5 p0.5
18.5 p0.5
18.5 p0.5
Feed hole centre to top
H+H component < H 1
H+H component < H 1
H+H component < H 1
H+H component < H 1
H+H component < H 1
H+H component < H 1
H+H component < H 1
H 1
edge of the component
32.25 max.
32.25 max.
24.5 to 31.5
25.0 to 31.5
26.0 to 37.0
30.0 to 43.0
35.0 to 45.0
Pin spacing at
27.5 p0.8
5.0 +0.8
F
2.5 p0.5
7.5 p0.8
10.0 p0.8
15 p0.8
22.5 p0.8
upper edge of carrier tape
–0.2
+0.06
+0,06
+0,08
+0,08
+0.08
Pin diameter
d
0.4 p0.05
0.5 p0.05
„ 0.5 p0.05 or 0.6 –0.05
„ 0.5 p0.05 or 0.6 –0.05
0.8 –0.05
0.8 –0.05
0.8 –0.05
Component alignment
Dh
p 2.0 max.
p 2.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
Total tape thickness
t
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
ROLL/AMMO
AMMO
Package
52 p2
54 p2 depending
REEL P 360 max.
B 52 p2 depending on
(see also page 128)
REEL P 360 max.
P 500 max.
B 58 p2 or REEL
B 60 p2 on PCM and
P 30 p1
58 p2 comp. dimensions
P 30 p1
P 25 p1
66 p2
68 p2 component dimensions
Unit
see details page 130.
Dims in mm.
„ Diameter of pins see General Data.
Please clarify customer-specific deviations with the manufacturer.
* PCM 10 and PCM 15 can be crimped to PCM 7.5.
Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible
127
1036146067.236.png 1036146067.237.png 1036146067.238.png 1036146067.239.png 1036146067.241.png 1036146067.242.png 1036146067.243.png 1036146067.244.png 1036146067.245.png 1036146067.246.png 1036146067.247.png 1036146067.248.png 1036146067.249.png 1036146067.250.png 1036146067.252.png 1036146067.253.png 1036146067.254.png 1036146067.255.png 1036146067.256.png 1036146067.257.png 1036146067.258.png 1036146067.259.png 1036146067.260.png 1036146067.261.png 1036146067.263.png 1036146067.264.png 1036146067.265.png 1036146067.266.png 1036146067.267.png 1036146067.268.png 1036146067.269.png 1036146067.270.png 1036146067.271.png 1036146067.272.png 1036146067.274.png 1036146067.275.png 1036146067.276.png 1036146067.277.png 1036146067.278.png 1036146067.279.png 1036146067.280.png 1036146067.281.png 1036146067.282.png 1036146067.283.png 1036146067.285.png 1036146067.286.png 1036146067.287.png 1036146067.288.png 1036146067.289.png 1036146067.290.png 1036146067.291.png 1036146067.292.png 1036146067.293.png 1036146067.294.png 1036146067.296.png 1036146067.297.png 1036146067.298.png 1036146067.299.png 1036146067.300.png 1036146067.301.png 1036146067.302.png 1036146067.303.png 1036146067.304.png 1036146067.305.png 1036146067.307.png 1036146067.308.png 1036146067.309.png 1036146067.310.png 1036146067.311.png 1036146067.312.png 1036146067.313.png 1036146067.314.png 1036146067.315.png 1036146067.316.png 1036146067.318.png 1036146067.319.png 1036146067.320.png 1036146067.321.png 1036146067.322.png 1036146067.323.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin