PDP-R05XDE Sup.pdf
(
2495 KB
)
Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
PDP-505XDE
PDP-435XDE
DTV Operating Instructions
Mode d’emploi de DTV
DTV-Bedienungsanleitung
Istruzioni per l’uso del DTV
DTV gebruiksaanwijzing
Bruksanvisning för DTV
Manual de instrucciones de DTV
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future reference.
For the handling procedures and the other functions, refer to the dedicated
operation manual.
01 Enjoying DTV broadcasts
Watching DTV programmes ................................................. 3
Changing channels ........................................................ 3
Using banner information .............................................. 3
Subtitles ........................................................................... 4
Setting the Country ........................................................ 4
Replacing Existing Channels ......................................... 4
DTV Programme Timer Setting ............................................ 5
Setting up digital TV channels manually ............................ 5
Adding New Channels ................................................... 5
Checking signal strength ............................................... 5
Setting Aerial Power ....................................................... 5
Restoring System Defaults ............................................ 5
Using Channel Management ............................................... 6
Setting Channel Options ................................................ 6
Enabling Favourite Channels ......................................... 6
Enabling Auto Skip ......................................................... 6
Sorting preset DTV Channels ............................................... 7
Setting User Preferences ..................................................... 7
Setting Digital Audio ...................................................... 7
Setting Audio, Subtitle and Teletext Language .................. 8
Using Software Update ........................................................ 8
Using Auto Update ......................................................... 8
Setting Update Time ....................................................... 8
Starting Manual Update ................................................. 8
Displaying Technical Information .................................. 9
Using MHEG application (UK only) ............................... 9
Screen Saver ................................................................... 9
Common Interface .......................................................... 9
Inserting a CA Card ........................................................ 9
02 Using Electronic Programme Guide (EPG)
(for DTV only)
EPG display format ............................................................. 10
Using the EPG ..................................................................... 11
Presetting TV programmes using the EPG ....................... 12
Using auto channel select and standby recording .... 12
Setting the timer manually .......................................... 13
Priority rules for overlapped presettings ..................... 13
Changing/cancelling TV programme presettings ...... 14
Changing priorities for overlapped presettings ......... 14
Using other useful EPG functions ..................................... 15
EPG Jump ...................................................................... 15
EPG Search ................................................................... 15
• Some parameter adjustments may not be memorised if the
Media Receiver is switched off without entering the standby
mode.
Enjoying DTV broadcasts
01
Using banner information
1
Watching DTV Programmes
Digital TV (DTV) not only replaces the conventional analogue
TV channels, but also provides more channels, clearer picture
quality, and various types of useful information. It also
provides various features, including subtitling and multiple
audio tracks.
Press
p
.
• When in the DTV mode, press
/
to display the Info
banner on other channels.
001
Wed.30.Apr 12:46
************
Now
11:30
12:00
-
-
12:00
12:30
********************
*************
Next
• When executing Auto Installation (page 28 in the operating
instructions), make sure to select “Digital” or “All” as the
tuner type.
• Selecting the DTV mode when no channels yet searched
will only display “DTV Setup” screen with only the item
“Installation” selectable.
• While in the DTV mode, press
m
to display the Teletext
screen (except in UK).
• Press
ENTER
to tune in a channel.
• The info banner also displays icons for Favourites (
),
Subtitles (
) and Teletext (
) if they apply to the
selected channel.
• Press
EXIT
to remove the Info banner from the
screen.
2
To view more detailed programme information, press
p
again.
Now
11:30 -
12:00
************************
Changing channels
More...
1
Press
TV/DTV
to select the DTV mode.
2
Press
ENTER
to call up the Channel List screen.
• Switch Now and Next programmes ( / ).
• Display detailed information about other channels
( / ).
• Press
ENTER
to remove the detailed information and
tune in to the channel.
• Press
RETURN
to remove the detailed information
screen.
• Press
EXIT
to remove the on-screen information from
the screen.
• If the banner contains further information, “More …”
is displayed.
001
002
003
004
************
************
******
************
005
006
****
******
• Select a channel ( / then
ENTER
).
• You can also select channels by pressing buttons
0
to
9
and
P+/P–
on the remote control unit.
• Banner information is updated every minute.
• Some programmes may not provide detailed programme
information.
• Due to the inaccurate information provided by the broad-
caster some icons may appear or be absent in error.
• While in DTV mode, press
001
to access channel 1 (1-digit
channel) quickly. You can however, select the channel 1 by
pressing
01
or
1
but have to wait for 2 seconds since the
last digit input. The same applies for 2-digit channels.
•
P+/P–
cannot pick up channels that are set to skip or not
registered as favourites (with Favourite function set to “On”,
see page 6 for details).
• If the channel is locked, you must enter the correct pass-
word each time (see page 42 in the operating instructions).
• While receiving DTV radio channels, the screen saver
automatically starts when no operation is done for 3
minutes.
3
En
01
Enjoying DTV broadcasts
Subtitles
Replacing Existing Channels
Follow the procedures below to cancel all channel informa-
tion and then download and install again.
1
1
When in the DTV mode, press
[
to turn subtitles on
and off.
Press
HOME MENU
.
2
Select “Setup” (
/
then
ENTER
).
Subtitles On
3
Select “DTV Setup” (
/
then
ENTER
).
4
Select “Installation” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
–
9
.
• The subtitle image is also recorded with this function on.
5
Select “Replace Existing Channels” ( / then
ENTER
).
• The System starts discarding all channel information,
and then, when it is finished, starts the channel
search again.
Setting the Country
You can change the country setting even after executing Auto
Installation.
1
Replace Existing Channels
Press
HOME MENU
.
2
Select “Setup” (
/
then
ENTER
).
Search Information
Found Channels
3
Select “DTV Setup” (
/
then
ENTER
).
Existing Channels
04
001
002
************
************
******
************
4
Select “Installation” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
–
9
.
New Channels Found
20
30%
Progress
003
004
5
Select “Country” (
/
).
6
Select a country (
/
).
• To quit a channel search in progress, press
HOME
MENU
.
Installation
Aerial Power
Off
Germany
Country
Add New Channels
• To complete “Replace Existing Channels”, there must be
more than 1 hour at least left to the next preset recording or
preset Auto Update time.
Replace Existing Channels
Signal Check
Restore System Defaults
• The available country settings are: Finland, Germany,
Italy, Netherlands, Spain, Sweden and the United
Kingdom.
4
En
Enjoying DTV broadcasts
01
Checking signal strength
You can check the signal strength and signal quality of each
TV channel.
1
DTV Programme Timer Setting
With the Programme Timer list you can sort the order of
programmes or delete programmes that are preset for
recording/watching.
1
Repeat steps 1 to 4 provided for
Adding New
Channels
.
Press
HOME MENU
.
2
2
Select “Signal Check” (
/
then
ENTER
).
Select “Setup” (
/
then
ENTER
).
3
Select “RF Channel” (
/
then
ENTER
).
3
Select “DTV Setup” (
/
then
ENTER
).
4
/
4
Select the channel to be checked (
).
Select “Programme Timer” (
/
then
ENTER
).
5
Set the start and end time of preset recording/watching
and the channel number ( / ,
/
or
0
–
9
). Register
after all desired settings are made (
ENTER
).
Signal Check
RF Channel
21
Add New Channels
Signal Strength
:
77%
Setting up digital TV channels manually
This section describes how to add new digital TV channels.
0
25
50
75
100
Signal Quality
:
100% Good
Adding New Channels
You can scan the new TV channels and download them to
your Plasma Display System.
1
• Use “Add New Channels” function here to add
channels within the selected RF Channel (receiving
frequency).
Press
HOME MENU
.
2
Select “Setup” (
/
then
ENTER
).
3
Select “DTV Setup” (
/
then
ENTER
).
Setting Aerial Power
The power supply to the antenna connected to the DTV
antenna terminal can be switched on or off.
1
4
Select “Installation” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
–
9
.
Repeat steps 1 to 4 provided for
Adding New
Channels
.
5
Select “Add New Channels” (
/
then
ENTER
).
2
Select “Aerial Power” (
/
).
Installation
3
/
Select “On” or “Off” (
).
Aerial Power
Off
Germany
Installation
Country
Add New Channels
Aerial Power
Off
Country
Add New Channels
Replace Existing Channels
Germany
Signal Check
Replace Existing Channels
Restore System Defaults
Signal Check
Restore System Defaults
• Channel search automatically starts.
Add New Channels
Restoring System Defaults
Use this function only when you wish to reset all the DTV
settings to the factory defaults.
1
Search Information
Found Channels
Existing Channels
04
001
002
************
************
******
************
New Channels Found
20
30%
Press
HOME MENU
.
Progress
003
004
2
Select “Setup” (
/
then
ENTER
).
3
Select “DTV Setup” (
/
then
ENTER
).
4
Select “Installation” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
–
9
.
• To quit a channel search in progress, press
HOME
MENU
.
5
Select “Restore System Defaults” (
/
then
ENTER
).
• A confirmation screen appears.
6
With “OK” pressed, the system restores the factory
defaults. After this Auto Installation is initiated
automatically.
5
En
Plik z chomika:
ql_man
Inne pliki z tego folderu:
1 Television Technology Today.pdf
(4768 KB)
04Oct_RS232Cspec_euro_5G.pdf
(37 KB)
2 Hi-Def 22-07-04.pdf
(4026 KB)
4 PDP publicity Nov04.pdf
(2413 KB)
3 HDMI WNY.pdf
(1226 KB)
Inne foldery tego chomika:
Accessories
Bulletins
PDP-R04E
PDP-R05FDE XDE
Service Manuals
Zgłoś jeśli
naruszono regulamin