A 03 en.pdf

(143 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Product Information
B&W PHOTO PRODUCTS
Fine Grain Universal Powder Film Developer A 03
A 03 is a 2 part powder Film developer, designed to process B&W Negative Films of different Film
speed but in one process at same processing time. Processing in A 03 developer leads to Negatives
with fine grain structure at medium contrast.
A 03 can be used for manual and automatic processing with Standard times as well as for “push”
process.
A 03 is comparable with products like Agfa Refinal M, Ilford Microphen or Tetenal Ultrafin SF.
Commercial Packing Sizes
Order Code No. 11021
A 03
to make 20 x 5,0 Litres
(Powder Developer,2 parts)
Mix Instruction
Take Water
(at 30 - 40 ° C )
of 4/5 from final
package volume
Add part 1
while stirring
Add part 2
while stirring
Fill up with water
(at 10 - 20 ° C )
to final package volume
ATTENTION: Do not split contents of Original Package.
Processing Times
At 20 ° C in trays and tins; medium contrast (g = 0,65)
Agitation:
- move film continously in the developer solution during first minute
- then move film all 30 seconds for 3 seconds in the developer solution
Page 1 of 3
reviewed on: 15/12/04
Calbe Chemie GmbH
Gewerbegebiet Nord
Telefon +49-3 92 91–4 25-0
www.calbe-chemie.de
Stadtfeld 31• 39240 Calbe Telefax +49-3 92 91–4 25 25
info@calbe-chemie.de
841838189.043.png 841838189.044.png 841838189.045.png 841838189.046.png 841838189.001.png 841838189.002.png 841838189.003.png 841838189.004.png 841838189.005.png 841838189.006.png 841838189.007.png 841838189.008.png 841838189.009.png 841838189.010.png 841838189.011.png 841838189.012.png 841838189.013.png 841838189.014.png 841838189.015.png 841838189.016.png 841838189.017.png 841838189.018.png 841838189.019.png 841838189.020.png 841838189.021.png 841838189.022.png 841838189.023.png
 
Product Information
B&W PHOTO PRODUCTS
Fine Grain Universal Powder Film Developer A 03
Film Manufacturer
Film Type
Processing Time
(at 20 ° C )
AGFA
APX 25
6 to 8 min
APX 100
6 to 8 min
APX 400
6 to 8 min
FORTE
PP 100
5 to 6 min
FP 100
5 to 6 min
FP 200
5 to 6 min
FP 400
5 to 6 min
FUJI
NP 400
5 to 6 min
NP 1600
5 to 6 min
ILFORD
PAN F
6 to 7 min
FP 4
6 to 7 min
HP 5
6 to 7 min
DELTA 100
6 to 7 min
DELTA 400
5 to 7 min
KODAK
Tmax 100
6 to 8 min
Tmax 400
6 to 8 min
Tmax 3200
6 to 8 min
Tri X
6 to 8 min
ORWO
ORWO PAN 25
8 to 10 min
ORWO PAN 100
8 to 10 min
ORWO PAN 400
8 to 10 min
All times listed above are values for orientation; processing unit: tray, tin, …;
Contrast: medium (g=0,65).
To get maximum Film speed or to higher nominal Film speed „pushing“ of process is possible.
Notice: When „pushing“ negatives higher contrast and lower resolution power (caused by bigger
grains in negative structure) are obtained. If negatives with high balance in contrast and grain are
required, then developer can be used in dilution of 1 + 1.
At processing temperatures lower or higher than 20 ° C, prolong or reduce processing time, as
follows:
at 18 ° C
prolong by appr. 20 %
Page 2 of 3
reviewed on: 15/12/04
Calbe Chemie GmbH
Gewerbegebiet Nord
Telefon +49-3 92 91–4 25-0
www.calbe-chemie.de
Stadtfeld 31• 39240 Calbe Telefax +49-3 92 91–4 25 25
info@calbe-chemie.de
841838189.024.png 841838189.025.png 841838189.026.png 841838189.027.png 841838189.028.png 841838189.029.png 841838189.030.png 841838189.031.png 841838189.032.png 841838189.033.png 841838189.034.png 841838189.035.png 841838189.036.png 841838189.037.png 841838189.038.png 841838189.039.png 841838189.040.png 841838189.041.png
 
Product Information
B&W PHOTO PRODUCTS
Fine Grain Universal Powder Film Developer A 03
at 22 ° C
reduce by appr. 15 %
bei 25 ° C
reduce by appr. 35 %
Capacity
A 03 works without replenisher. Up to 10 film rolls size 135-36 or size 120 can be processed in 1
Litre of working solution in normal dilution.
Beginning with third film and then each film following, processing time has to be prolonged by 1
minute.
When diluting Standard working solution 1 + 1, processing time must be prolonged by 1 minute
per film beginning with second film already. In 1 Litre of 1 + 1 diluted Standard working solution
can be processed nearly 7 to 8 film rolls size 135-36 or size 120.
Further products in B&W Film Process
Stop bath: A 202 - Fixer: Powder Fixer A 300 or
UNIFIX liquid Speed Fixer Concentrate - Special Rinse: F 905
Storage and Handling
Developer powders have to be kept dry (at 10 to 25 ° C) in the closed package before mixing with
water.
It is recommended to wear protective gloves, when handling and working with photochemical
powders and solutions.
Industrial User: Note the governmental regulations and laws, when disposing used chemicals.
For further information, please contact the manufacturer.
Page 3 of 3
reviewed on: 15/12/04
Calbe Chemie GmbH
Gewerbegebiet Nord
Telefon +49-3 92 91–4 25-0
www.calbe-chemie.de
Stadtfeld 31• 39240 Calbe Telefax +49-3 92 91–4 25 25
info@calbe-chemie.de
 
841838189.042.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin