PROGRAMME A V1.09 release notes
System Requirements:
· Microsoft Windows 98, Windows 98SE, Windows ME, Windows NT 4.x, Windows 2000, or Windows XP.
· Need ActiveSync 3.5 (build 12007) or later.
· Should use USB or Serial port connection directly.
Trouble Shooting:
· If this upgrade failed and a pop up error message appears, please be careful to read the error message and follow the instructions to recover the error. If you just follow the instructions in the error message and run the utility again, almost all errors that happen in the upgrade process can be recovered.
· Do not do a hard-reset when you encounter an error message, unless you are instructed to do so.
· If an error occurs while upgrading the ROM image( that is, the progress bar appears on both the PC side and device), the error message will instruct you to reset the device and run the utility again. At this moment, you will find that the screen in your device is a progress bar. This is normal, because your Windows CE in device is destroyed. You just follow the instructions and run the utility again, it will be recovered.
· Sometimes, you will find that you failed to upgrade through the USB connection. Please check the device maganger in your PC to see if the USB device works properly. If the USB device fails, please restart your PC and try again.
· Sometimes, you will find that your ActiveSync failed when you finished upgrading. Please just restart your PC again.
· If you still have a problem upgrading your ROM image, please feel free to contact our service center.
Known Issues:
· When you finished upgrading, you will find that there are two ActiveSync icons on the tray. One is active and the other is disabled. You just move the mouse cursor over the disabled one and it will disappear.
· Do not upgrade through USB hub, it will cause communication error.
JUL 20, 2002
ludzka_swinia