STR500 Wall Module.EN.pdf
(
694 KB
)
Pobierz
STR500
02-00107-01-en
Wall Module
Installation Instruction
AttAching/Removing the fRont
mounting, cAbles
The front is attached to the base-plate using four clamps,
two at the top of the front panel and two at the bottom.
To avoid base plate
deformation, be care-
ful when tightening
the mounting screws.
Note that the en-
closed screws are
mainly intended for
the US and Australian
markets.
When removing the front-panel use a screwdriver (or similar)
and push gently to unhook the clamps at the top and bottom
of the front panel.
1 1 12
11 12
Removing the coRe
connecting
The core panel is attached to the base-plate using two
hinges. Remove the core panel by pushing the bottom of the
core panel upwards, then unhinging the core panel from the
base-plate.
stR500
11
12
Made in Sweden
02-00107-01-en, Sep 2010
1 (2)
For more information visit
www.schneider-electric.com/buildings
2 (2)
02-00107-01-en, Sep 2010
Plik z chomika:
origator
Inne pliki z tego folderu:
SCD and SCR HS Sensor Replacement Product Identification.EN.pdf
(1513 KB)
SCD100 Duct CO2 Transmitter 0–10 V and Temperature Sensor.EN.pdf
(716 KB)
SCR100 Room CO2 Transmitter.EN.pdf
(512 KB)
SLO300_SLO310 Outdoor Light Transmitter.EN.pdf
(26 KB)
SPD110_SPD160 Differential Pressure Sensor.EN.pdf
(55 KB)
Inne foldery tego chomika:
Certyfikaty
Karty katalogowe
Katalogi i ulotki
Zgłoś jeśli
naruszono regulamin