ALP_TRG110 CAD Examples 2013R1 V4.pdf

(1351 KB) Pobierz
ALP-TRG110
CAD Examples
1018357505.018.png 1018357505.019.png
CAD Examples
Copyright.
Copyright © 2010 Planit Software Ltd. All rights reserved.
Any copyright, or other intellectual property right, of whatever nature which subsists or may
subsist in the presentation and/or content of the programs, (including without limitation its
look, feel, visual or other non-literal elements), remains the property of Planit Software Ltd or
its licensor(s) absolutely.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system or translated into any language, in any form or by any means, electronic,
mechanical, optical, chemical, manual or otherwise, without the express written permission
of Planit Software Ltd.
Unauthorised reproduction or distribution of these programs or any part thereof is unlawful
and may result in civil or criminal penalties.
Alphacam and the Alphacam Logo are trademarks of Planit Software Ltd.
Windows is a trademark of Microsoft Corporation.
All product names mentioned in this publication, and not listed above, are acknowledged as
the trademarks of the respective manufacturers and producers of such products.
Planit Software Ltd makes no representations or warranties with respect to the contents
hereof and specifically disclaim any implied warranties of satisfactory quality or fitness for
any particular purpose. Further, Planit Software Ltd reserves the right to revise this
publication and to make changes in the contents hereof without obligation to notify any
person of such changes or revisions.
The information contained within this document is subject to change without notice and does
not represent a commitment on the part of the vendor. The software described in this
document is furnished under a licence agreement and may be used or copied only in
accordance with the terms of the agreement.
Page 2 of 31
A0
1018357505.020.png 1018357505.021.png 1018357505.001.png 1018357505.002.png 1018357505.003.png
 
CAD Examples
Version 4
Page 3 of 31
A0
1018357505.004.png 1018357505.005.png 1018357505.006.png 1018357505.007.png
 
CAD Examples
Page 4 of 31
A0
1018357505.008.png 1018357505.009.png 1018357505.010.png 1018357505.011.png 1018357505.012.png
 
Tutored CAD Examples
Tutored CAD Examples
Styles Plate
Drawing Process Plan based on the Constituent parts:
•
Drawing Datum set at the lower left corner.
•
Outer 300mm x 300mm Rectangle.
•
Inner rectangle 50mm inset on 3 sides 75mm on 1 side.
•
The inner rectangle has Radius 7 Bubble fillets to relieve the corners.
•
Slot 24mm x 150mm positioned 50mm x 50mm from bottom right corner.
•
4 off circles 8 dia. in 250mm rectangular pattern 25mm x 25mm from datum.
Version 4
Page 5 of 31
A0
1018357505.013.png 1018357505.014.png 1018357505.015.png 1018357505.016.png 1018357505.017.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin