======================================================================== *** Basic Information *** ======================================================================== [Create date] 2008/12/04 ------------------------------------------------------------------------ [Program Name] SD Printer ------------------------------------------------------------------------ [Version] 1.13 ------------------------------------------------------------------------ [PCB No.] B2375617W ------------------------------------------------------------------------ [Interchangeability] X / O ------------------------------------------------------------------------ [Other Firmware Requirements] None ------------------------------------------------------------------------ [PCB Requirements] None ------------------------------------------------------------------------ [Software category] Normal Release ------------------------------------------------------------------------ [Release category] Normal Release ------------------------------------------------------------------------ [Program category] ------------------------------------------------------------------------ Exported to(language) GEN(all) [Firmware No.] B7885601L [File Information] File Name B7885601L.rru File Type Module for Remote Upgrade Size 3.00 MB ( 3146392 byte ) [File Information] File Name B7885601L.fwu File Type Module for Service Size 3.00 MB ( 3146136 byte ) ------------------------------------------------------------------------ [Production reflection] 2008/12 ------------------------------------------------------------------------ ======================================================================== *** Note *** ======================================================================== [Note] ------------------------------------------------------------------------ ======================================================================== *** Important Notes *** ======================================================================== [Important Notes] ------------------------------------------------------------------------ ======================================================================== *** Modification History *** ======================================================================== [Modifications made:] Symptom corrected: 1. 1)The PCL5 line pitch might be printed larger than the original. 2)The printable area of a PCL5 page might extend beyond the border on the right side. 2.If the Selective User Authentication function (SP5-420-041) and User Authentication are both enabled, unauthenticated users can directly access the urls of WIM's Printer Job History, Printer Error Log and Print Job List. 3.Personal Information Protect (SP5-888-001 = 1) is unable to prevent users from directly accessing the urls of WIM's Printer Job History, Printer Error Log and Print Job List. 4."Replace Bk PCU" is not displayed on Web Image Monitor. ------------------------------------------------------------------------ [Modification history] ---------------------------------------- Version 1.12 The "Bel Service" (and "System" category as a whole) were removed from the Status screen in the Acacia display. ---------------------------------------- Version 1.11 Symptom corrected: 1.The username/usercode used to submit a stored job (Sample Print/ Locked Print/Hold Print/Stored Print) is not shown in the Job Log of Web SmartDeviceMonitor ver 2.x. ---------------------------------------- Version 1.10 Symptom corrected: 1.The "Blank Page Print" setting (User Tools->Printer Features->System) reverts to its default (ON) when the device's power is cycled. (TechMail#RE070458) 2.PCL jobs containing fonts with a number of characters that is evenly divisible by 256, might cause the device to stall. (GFPR#RE0706006, RA07090001) 3.Subsequent PCL jobs will be canceled after the device prints a large number of jobs (more than 2000) submitted by the PCL 6 driver. (GFPR#RE07080008) ---------------------------------------- Version 1.09 Symptom corrected: 1.Various printing anomalies when printing PowerPoint2007 jobs that have Autoshapes and shadows. This can occur if printing with both of the following RPCS driver settings: -Resolution: 1800 x 600 dpi -Job Load Distribution: Shift load to driver 2.The WIM printer menu is not available in Catalan or Turkish. ---------------------------------------- Version 1.08 Symptom corrected: 1.PCL jobs containing character codes that are not on the font SD card, might cause the device to stall. 2.Jobs containing bitmapped PCL fonts might cause the device to stall. ---------------------------------------- Version 1.07 Other changes: Supports the Catalan and Turkish languages.For the details of this, please refer to RTB#RB230024 "Supports the Catalan and Turkish languages". Note: To support this feature, install all of the following firmware: -System_Copy firmware ver 1.61 or later -LCDC firmware ver 1.27 or later (Language firmware ver 0.74 or later) -Fax firmware ver 02.03.00 or later -FCU firmware ver 04.00.00 or later -Printer firmware ver 1.07 or later -Websys firmware ver 1.08.1 or later -WebDocBox firmware ver 1.15 or later -Scanner firmware ver 1.21 or later Symptom corrected: If a user tries to print a stored job (ie. Locked Print) while the ScanRouter capture function is enable, the device might stall. ---------------------------------------- Version 1.06 Symptom corrected: 1.After selecting a file in the Print Jobs menu in the operation panel, all of the following buttons might remain greyed out.(FPR#RE06120004)­ -"Print"­ -"Delete" -­"Select All Jobs" -"Clear All"­ -"Unlock File" (File Administrator privileges required)­ -"Cahnge Password" 2.PDF files printed using Adobe Acrobat and the RPCS driver might be missing characters or portions of characters. This occurs if both of the following conditions are met: ­ -"Shift load to printer" selected for the RPCS driver's Job Load Distribution setting.­ -Image rotation required: Portrait document to LEF paper -or- Landscape document to SEF paper. 3.Accessing the document server in WIM via an single sign-on server might result in "404 Not Found".This only happens if the url used to access WIM contains a "Host Name" and "Domain Name" (The "domain name" setting in the MFP is not blank.). It does not happen if the url contains an IP address. Note:To fix this issue, all of the following firmware must be applied:­ -System_Copy firmware ver 1.60 or later­ -Websys firmware ver 1.07 or later ­ -Netfile firmware ver 2.01.8 or later ­ -WebDocBox firmware ver 1.14 or later -­Printer firmware ver 1.06 or later­ -(If the FAX unit is installed): FAX firmware ver 02.02.00 or later ---------------------------------------- Version 1.05 The device supports Unicode v3.0 fonts. Unicode v3.0 fonts for Japanese/Korean/Traditional Chinese/Simplified Chinese are only available with the Unicode Font Package for SAP. Symptom corrected: 1.PCL data might be printed as garbage characters after several hundred pages of PCL data are printed without a power-off. (Techmail#TS060753) . 2.PCL jobs that include seperator pages might be printed as garbage characters (FPR#RC06040009/RC0610007). ---------------------------------------- Version 1.04 1.Fixed: The following reports are printed in a language other then Russian, even if Russian is selected as the primary system language. - Configuration Page - Menu List - Error Log* *Additionally, the title "File Name" in the Error Log will contain garbage characters.) 2.Fixed: PCL jobs might result in tray errors if the device is in sleep mode. 3.Fixed: HPGL syntax error (missing label terminator) will cause the device to stall. "Processing" will be displayed in the operation panel (GFPR#RC05030015). ---------------------------------------- Version 1.03 Anomalies printing PCL raster data including the superimposed images. Symptom corrected: 1. Wording errors on the Configuration Page and Menu List (Swedish). 2. The default value for maximum toner amount for text was decreased from 200% to 170%. ---------------------------------------- Version 1.02 1st mass production
d.byczek