pc-207_im_A0XW-9551-00_E.pdf
(
3818 KB
)
Pobierz
PC-207
Paper Feed Cabinet
INSTALLATION MANUAL
Applied Machines: C360/C280/C220
COLOR MFP: 36 ppm/28 ppm/22 ppm
Product Code: A0ED
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded
(mass: approx. 30.5 kg (67 lb)).
No.
Name
Shape
Q’ty
8.
Screw B
(4 × 8 mm)
9
4038IXC033DA
9.
Screw C
(4 × 10 mm)
4
4038IXC033MA
I. Accessory parts
10.
Paper size
label
1
set
No.
Name
Shape
Q’ty
1.
Fixing leg A
11.
Installation
manual
1
set
3
4980IXC019MA
4348U020MA
2.
Fixing leg B
1
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
4348U020MB
3.
Fixing leg
cover A
3
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
4348U099MA
4.
Fixing leg
cover B
1
4348U099MB
5.
Fixing
bracket A
3
4658U021AA
6.
Fixing
bracket B
1
A093IXC004DA
7.
Screw A
(black)
(4 × 8 mm)
5
4038IXC033DA
A0XW-9551-00
E-1
II. Installation procedures
1. Turn off the machine.
2. Remove the cord clamp and unplug the power
cord from the machine (one screw).
Note:
When removing the paper feed cabinet from its
shipping carton, do not hold the reinforcement
bracket (as a personal injury or a deformed frame
could result).
Reinforcement bracket
A0XWMXC031MA
A0XWMXC010MB
3. Remove the protective tape from the paper feed
cabinet.
Note:
Do not peel the tape that fixes the paper feed cab-
inet hookup harness in position until the machine
is attached to the paper feed cabinet.
Hookup
harness
A0XWMXC020MD
A0XWMXC021MA
A0XWMXC026MA
E-2
4. Pull out the handles.
6. Remove the drawer rear under cover from the
machine (one screw).
A0XWMXC101MA
A0XWMXC001MB
5. Holding the transportation handles at the right
and left of the machine, place the machine onto
the paper feed cabinet. When placing the
machine, use the positioning pins in the rear of
the paper feed cabinet to align the machine cor-
rectly with the cabinet.
Note:
•
7. Peel the tape that fixes the paper feed cabinet
hookup harness in position.
When transporting or moving the machines,
assign adequate number of persons.
•
When attaching the machine, as the reference
fit the machine with the corner A and B of the
paper feed cabinet.
A0XWMXC002MB
When holding the transportation handles,
be careful not to catch your fingers in the
machine.
8. Connect the two connectors of the paper feed
cabinet hookup harness to the machine.
A0XWMXC003MB
A0XWMXC102MA
A
B
A0EDIXC002DA
E-3
9.
Secure the paper feed cabinet to the machine by
the two fixing bracket A’s (two screw A’s fur-
nished with the paper feed cabinet).
11. Slide out the second and third drawers from the
paper feed cabinet.
12. Secure the paper feed cabinet to the machine by
the fixing bracket A (right) and the fixing bracket
B (left).
Fixing bracket A :
one screw A furnished with the paper feed cabi-
net.
Fixing bracket B :
two screw A’s furnished with the paper feed cab-
inet.
Note:
The fixing bracket B can be placed upside down.
A0XWMXC004MB
10. Reinstall the drawer rear under cover which has
been removed in step 6 (one screw).
A0XWMXC006MA
A0XWMXC005MB
13. Slide the drawers back in.
14. Move the machine and paper feed cabinet to the
installation site. Then, adjust the two adjusters at
the front to let the paper feed cabinet sit on the
floor.
A0XWMXC107MA
E-4
15. Install the fixing leg A’s at two locations in the
front shown in the illustration (six screw B’s fur-
nished with the paper feed cabinet).
Note:
When mounting the finisher at the same time, do
not install the fixing leg A or fixing leg cover A at
the left front side.
17. Install the fixing leg A (left rear) and the fixing leg
B (right rear) shown in the illustration.
Tighten the screw C's into the hole A's to install
the fixing leg B.
Fixing leg A :
three screw B’s furnished with the paper feed
cabinet.
Fixing leg B :
four screw C’s furnished with the paper feed
cabinet.
Note:
If the screw C's cannot be tightened into the hole
A's because the machine is installed on cushioned
floor such as a carpet, use the hole B's.
To reduce the risk of injury due to unsta-
ble equipment, set stabilizers before use.
To reduce the risk of injury due to unsta-
ble equipment, set stabilizers before use.
➀
➁
➂
➀
➀
➂
➁
A0XWMXC007MA
16. Install the fixing leg cover A’s (two pieces) at two
locations in the front shown in the illustration.
Note:
•
➁
➂
➃
Insert the fixing leg cover A’s in the direction
shown by arrow until they click into position.
➀
•
Insert the protruded portions of the fixing leg
cover A’s shown by the arrows into the fixing
leg.
➂
➁
B
A
A
B
A0XWIXC002MA
A0XWMXC008MA
E-5
Plik z chomika:
ramirez_pl
Inne pliki z tego folderu:
au-101_im_A09M-9557-00E.pdf
(362 KB)
au-102_im_A0X9-9557-00E.pdf
(359 KB)
au-201_im_A09N-9557-00E.pdf
(431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(1623 KB)
df-617_im_A0HU-9560-00E.pdf
(581 KB)
Inne foldery tego chomika:
firmware c280
User Guides
Zgłoś jeśli
naruszono regulamin