RAV243.txt

# 
# this config file was automatically generated
# using lirc-0.6.5(any) on Fri Jun 28 20:22:16 2002
# and slightly optimized manually.
#
# contributed by J.A. Bezemer
#
# brand: Yamaha Pre-programmed Multibrand, using code 0178
# model no. of remote control: Yamaha RAV243 (V829530 EU)
# devices being controlled by this remote: Probably JVC DVD player(s)
#
# NOTE: The used remote is a pre-programmed device which can emulate
# many hundreds of remote controls from about as many manufacturers.
# I needed a DVD-style control with a quite long range, using a 36-kHz
# IR-detector, so I tried all 20 available DVD-type emulations and this
# one was just the best. This is code 0178; code 0088 seems to have the
# exact same bits but probably uses another carrier (maybe 38 kHz) as it
# works only very close to the IR-detector. According to the manual,
# both 0178 and 0088 belong to one or more unspecified JVC DVD player(s).
# In this emulation mode, the remote doesn't transmit any signal for the
# ENTER, REC and AUDIO buttons, but then there's only one mode in which
# it does (namely 0008 which seems to be !=36 kHz).
# Also, the << and >> buttons (BACK/FORWARD) apparently transmit the same
# code as |<< and >>| (TRACK-/TRACK+), but then there are 6 other emulation
# modes in which << and >> don't transmit any signal at all.
#
# Warning: This file works fine with the lircd from LIRC 0.6.5, but it
# doesn't seem to work with earlier versions such as LIRC 0.6.1. Update
# your lircd when necessary.

begin remote

  name       JVCDVD
  bits            8
  flags   SPACE_ENC|NO_HEAD_REP|CONST_LENGTH
  eps            50
  aeps           50

  header       8380  4080
  one           630  1450
  zero          630   420
  ptrail        630
  pre_data_bits   8
  pre_data     0xF7
  gap         44470
  min_repeat      1
  toggle_bit      0


      begin codes
          1                        0x0000000000000086
          2                        0x0000000000000046
          3                        0x00000000000000C6
          4                        0x0000000000000026
          5                        0x00000000000000A6
          6                        0x0000000000000066
          7                        0x00000000000000E6
          8                        0x0000000000000016
          9                        0x0000000000000096
          0                        0x0000000000000076
          +10                      0x00000000000000F6
          TITLE                    0x0000000000000043
          UP                       0x000000000000000B
          MENU                     0x0000000000000083
          LEFT                     0x000000000000004B
          SELECT                   0x000000000000002B
          RIGHT                    0x00000000000000CB
          RETURN                   0x00000000000000AB
          DOWN                     0x000000000000008B
          DISPLAY                  0x0000000000000003
          BACK                     0x000000000000008D
          FORWARD                  0x000000000000000D
          PAUSE                    0x00000000000000B2
#         TRACK-                   0x000000000000008D
#         TRACK+                   0x000000000000000D
          STOP                     0x00000000000000C2
          PLAY                     0x0000000000000032
          POWER                    0x0000000000000002
      end codes

end remote