cf27mk2ntinsm--winNT4.pdf

Personal Computer

Supplementary Instructions for Windows ® NT ® 4.0

CF-27 Series

This manual contains supplementary instructions regarding the use of the computer. It explains the cases

where the operation of the computer differs from that in the Operating Instructions and Reference Manual.

Contents

First-time Operation .......................................... 2

Starting Up/Shutting Down ............................... 4

Dealing With Problems ...................................... 6

Reinstalling Software ..................................... 11

Specifications ................................................. 14

The following functions are not supported with Windows NT. Please ignore the description

in the "Operating Instructions" about the following functions.

Using USB Devices

Infrared Data Communications

Microsoft ® IntelliMouse ™ Wheel Mode

NOTE

An application software is needed to use the infrared data communications. The infrared

data communications can not be used at 4 Mbps data transfer speed.

Illustrations in this Manual

NOTE :

NOTE provides a useful fact or helpful information.

CAUTION :

CAUTION indicates a condition that may result in minor or moderate injury.

WARNING :

WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]:

This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter :

This illustration means to press the [Enter] key.

Fn + F5 :

This illustration means to press and hold the [Fn] key, then press the [F5] key.

First-time Operation

Please read the steps below to help you learn what accessories are included, and to gain an understanding of some

basic computer-related operations.

Confirm the inclusion of all accessories (except below

Operating Instructions page 8 )

Windows 95 System Pack .... 1

Windows ® 95 Book

Registration Card

Product Recovery CD-ROM

Windows NT Workstation System

Pack ....................................... 1

Windows NT Service

Pack 4 ............. 1

FIRSTAID CD...1

Windows NT ® Book

Floppy Disk

CD-ROM

2 Connect the battery pack ( Operating Instructions page 7)

3 Connect your computer to a power outlet ( Operating Instructions page 7)

4 Read the LIMITED USE LICENSE AGREEMENT (

Operating Instructions page 27)

5 Setup Windows NT ®

Turn your computer on (

Operating Instructions page 8)

The Software License Agreement will be displayed. After reading the agreement, select [I

Agree] or [I Disagree].

NOTE

Moving the cursor (

) or clicking buttons can be performed with the touch pad.

Select [Next].

Input your name and organization, then select [Next].

(It is possible to omit the organization item.)

Input the Product Number written on the “Certificate of Authenticity” located in the Win-

dows NT Book that comes with this computer then select [Next].

To move the cursor to a particular item, press Tab or click the desired box.

Input your computer name and select [Next].

Input an Administrator password and select [Next].

CAUTION

Remember this password! If the password is forgotten, Windows NT cannot be operated.

Select [Next].

When not establishing settings for a network:

Select [Do not connect this computer to a network at this time], then select [Next].

(Settings can be made for a network even after Windows starts up. In this case, be sure to

read [When Adding New Software or Hardware Components] in the Reference Manual [Tech-

nical Information].)

When establishing settings for a network:

The settings will vary for different network environments depending on the network system

being used. For more details, ask your system administrator or the person in charge of the

network. Follow the on-screen instructions.

(It takes several minutes for the necessary files to be copied. If the computer enters the ECO

mode, the power to the LCD is automatically turned off. In this case, press a key unrelated to the

direct triggering of a selection, like .

Ctrl

Select [Restart Computer]. Select "Windows NT Workstation Version 4.00" and press .

Enter

Following the display, press Ctrl + Alt + Del . Input the password set in step and

select [OK], then select [Close] at the [Welcome] display.

As the computer starts up, it will be necessary to input the password set in step .

Follow the on-screen instructions and install DS-XG Driver for WinNT.

(At the [YAMAHA DS XG Audio Driver], select [OK]. When the installation com-

pletes, select [Yes, I want to restart my computer now], select [Finish].)

Follow the on-screen instructions and install Phoenix APM 2.0 for Windows NT.

When the installation completes, select [Don't Restart Now].

Follow the display and install Phoenix Card Executive™ for Windows NT.

When the installation completes, select [Restart Now].

The [Begin Logon] display will appear. Perform the operation in step .

Select [Next] at the [Card Executive 2.0 for NT Diagnostics].

Select [Next], then select [Finish].

Windows will restart.

The [Begin Logon] display will appear. Perform the operation in step .

Double-click the [Internet Explorer] icon to install Internet Explorer.

Follow the on-screen instructions.

At the [Installation Option], by clicking , select [Full Installation], then select [Next].

At the [Confirm File Replace], press [No].

Windows will restart.

The [Begin Logon] display will appear. Perform the operation in step .

Set the correct settings for all items in [Control Panel]-[Regional Settings] and [Date/

Time] etc.

7 Create backup disks

Prepare 2HD floppy disks and make sure they are not in the write-protected state. Then, select

[Start] - [Programs] - [Panasonic] - [Create Tool disk]. Follow the on-screen instructions.

After this, place a label on each disk for identification purposes.

Names of created backup disks

Tool Disk, Backup Disk*

* There are instances where it is not necessary to create backup disks.

CAUTION

Please store the floppy disks in a safe place. They will enable you to return your com-

puter to factory default settings should any problems occur.

Do not remove the floppy disk while the FDD indicator ( ) is on, power down your

computer or use the suspend function ( "Suspend / Hibernation Functions").

When creating floppy disks, do not run any other application program.

When creating floppy disks and the message [Insufficient files to copy] is displayed,

press [OK] then contact Panasonic Technical Support.

The Tool Disk cannot be accessed through [My Computer] or by typing the "DIR" com-

mand at the Command Prompt, because it uses a special file format.

8 Install Acrobat ® Reader 3.01 (

Operating Instructions page 9)

9 Partition the Hard Disk

The hard disk includes an NT file system (NTFS) partition of 4GB. The remaining free hard

disk space can be used when necessary by creating more partitions (in [Start]-[Programs]-

[Administrative Tools (Common)]-[Disk Administrator]).

NOTE

In Windows NT4.0 Service Pack 4 CD-ROM, "Microsoft Data Access Components 2.0

Service Pack 1" etc. are included. Please read NTSP4.HTM and Y2K.TXT in Windows

NT4.0 Service Pack 4 CD-ROM, and install if necessary. To see the contents of Windows

NT4.0 Service Pack 4 CD-ROM, the CD-ROM drive is needed.

Starting Up/Shutting Down

Starting Up

1 Open the display (

Operating Instructions page11)

2 Turn your computer on ( Operating Instructions page 11)

3 Select your operating system

Select "Windows NT Workstation Version 4.00" and press Enter .

Logon

Wait for 10 seconds after confirming that the HDD access has been completed, then press Ctrl + Alt

+ Del .

5 Input your password

Input the user name and password, then press [OK]. If [Cancel] is clicked, the computer will return to

the initial [Begin Logon] display. Until the correct user name and password are entered, the computer

will not operate.

6 Select your application

You are able to start working on your computer.

NOTE

The power saving function is factory set to remove power from the LCD if the computer is not

operated or no access is made to a device for two minutes. The LCD will resume normal operation if

the touch pad is moved or if a key on the keyboard is depressed.

Using the Touch Pad

The touch pad driver is not installed.

(Use the touch pad to move the cursor (

below) on the display and perform normal computer operations.)

Basic Operation

Function

Touch Pad Operation

Moving the Cursor

Move the tip of your finger

lightly over the surface.

Tapping/Clicking

tapping

clicking

Double-Tapping/

Double-Clicking

double-tapping

double-clicking

Dragging

Two quick taps, but on

the second tap leaving

your finger down (apply-

ing pressure) and moving

it on the work surface.

While holding down the

button, moving your fin-

ger on the work surface.

Shutting Down (power off your computer)

This procedure is shutting down without using the suspend or hibernation function.

Display the shut down screen (

Operating Instructions page 18)

2 Confirm shut down

Select [Shut down].

Your computer will power off automatically.

(In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer con-

sumes approximately 1.5 W.)

NOTE

For the computer to automatically shut down after [Shutdown] is selected, Phoenix APM 2.0 for

Windows NT ® has to be installed. When

and

are displayed on the taskbar, this indicates that

the program is installed.

Restarting your computer (without shutting down) (

Operating Instructions page 18)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: